| Router Installation and Basic Configuration |
P1: Install and configure a basic router. Set up routing between multiple networks. |
|
|
| Firewall Installation and Basic Configuration |
P2: Install, enable, and start various firewall services. Verify firewall statuses. |
M1: Create rules to allow traffic only from specific IP addresses or networks. |
D1: Install and configure firewall rules with redteam resistance |
| Securing Incoming and Outgoing Traffic |
P3: Set default policies for incoming and outgoing traffic. Configure basic firewall rules to allow/deny specific services. |
M2: Use logs to block malicious traffic. |
|
| Configuring Ports and Services |
P4: List the currently open ports and services on the firewall. |
|
|
| Logging and Monitoring Firewall Activity |
P5: View basic firewall logs to monitor incoming and outgoing traffic. |
|
|
| Troubleshooting |
P6: Debug firewall service errors. |
|
|
| Routing and NAT Configuration |
|
M3: Set rules for port forwarding to internal IPs |
|
| Verbal Pass off |
P7: Successfully answer two TA chosen pass off questions. |
|
|